Mixing nozzle NOZZLE-BLACK-14 to buy

Product type	Suitable for	Length x width x height (box) (mm)	Box contents (st)	Carton contents (st)	Length (mm)	Weight per box (gram)	Number of boxes per master carton (st)	VE	Price per VE	Quantity per VE
189 71158 Mixing nozzle NOZZLE-BLACK-14	alle Sympafix injecieankers behalve X+150-PLUS en C200-PLUS Ultrabond	260x120x50 mm	10 st	100 st		100 gram	10 st	10	€13,70

Characteristics:

Specially developed mixing nozzles are available for the Sympafix range of chemical anchors.
Each chemical anchor in the Extreme, Ultrabond, Concrete and Multibase categories uses specific mixing nozzles.
Please note that the selected mixing nozzle is compatible with the injection mortar you are using: #71156 for the UC200-PLUS and X150-PLUS, #71158 for the C100-PLUS and M50-PLUS.
Mixing nozzle extensions for attachment to the mixing nozzle of injection mortars, for use with drill holes deeper than 125 mm.
The spout extensions are easy to cut to size. NEVER cut the spout itself.
The mixing nozzle must be replaced every time work is interrupted for longer than the gel time indicated on the cartridge.

The mixing nozzles are designed in such a way that they ensure correct mixing of the components, thus enabling correct and rapid processing.
The mixing nozzle extension allows deeper drill holes to be filled from below without air inclusion, which is essential for reliable fastening.
A float can also be clicked onto the end of the extension spout, which is pushed upwards by the injected mortar so that air entrapment can be completely prevented.

Mixing nozzle with an internal spiral of 14 turns, to be used in combination with injection mortar M50-PLUS and C100-PLUS. The mixing nozzle must be renewed at every work stoppage longer than the gel time indicated on the cartridge. Make sure that the selected mixing nozzle is compatible with the injection mortar you are using.